This came along with the skid plate and a did some modifications to get the fuel can mounted I had bough previously.
Tag: farkles
AXP Racing skid plate for CRF 300 L
Nothing that exciting to see here. The skid plate is pretty much what I expected. Seems thick and sturdy. My only complaint is that it rests against the frame tubes which means that the combination of dirt and vibrations will eventually rub away the paint from the frame.
Acerbis X-Factory handguard install on Honda CRF 300 L
Some background info in this post: https://honda250rally.wordpress.com/2021/08/11/handguard-info-warning/ Noteworthy info I have 30mm risers installed, so it gives me a little more room with the handguard mounts. The bars are stock bars. Prepping the bars and grips To mount the guards you first need to have access to the inside of the handlebar. On the clutch…
Riser installation on CRF 300 L
As expected, the bars are a bit too low for riding standing up. And as also expected the cables and wires don’t allow as much rise as I would like. To be on the safe side, I ordered 30mm risers, that after some pre purchase investigation seemed to be a doable amount of rise. The…
Handguard info & warning
Heads up for those thinking about installing / ordering handguards on the CRF 300 L (to my knowledge this applies to the 300 Rally too). The 300 L has threaded inserts INSIDE the bars. This means that you CAN NOT insert the standard expanding mounting hardware inside the bars. The inserts have M6 threads which…
H2C Tail Tidy for CRF 300 L
*** DISCLAIMER: I did not follow instructions and did a modified installation*** I bought the H2C tail tidy mainly because the other option available at bikerzbits.com/ was out of stock. I did have the even shorter version on the 250 Rally, but this one does not require any modifications to the wires and the original…
DIY skid plate for Honda CRF 300 L
Yes, it is horrible and will not survive any sort of remotely rougher use. I just wanted something to protect the lower part of the bike from the rock shower until I can find I proper one I like. I would prefer plastic over metal because of how the metal ones tend to resonate the…
Recommended modifications for the CRF 250 Rally
Before anyone goes off the chain, the following are MY recommendations based on MY riding style and riding conditions. There is no right or wrong. This list is comprised simply because I often get asked what the “recommended” or “must do mods” are. MODIFICATION WHY LINKS Proper hand guards DO Saves you a lot of…
