Handguard info & warning

Heads up for those thinking about installing / ordering handguards on the CRF 300 L (to my knowledge this applies to the 300 Rally too). The 300 L has threaded inserts INSIDE the bars. This means that you CAN NOT insert the standard expanding mounting hardware inside the bars. The inserts have M6 threads which…

H2C Tail Tidy for CRF 300 L

*** DISCLAIMER: I did not follow instructions and did a modified installation*** I bought the H2C tail tidy mainly because the other option available at bikerzbits.com/ was out of stock. I did have the even shorter version on the 250 Rally, but this one does not require any modifications to the wires and the original…

Honda CRF 300 L ECU swap

Crawling along a slow technical trail on this bike is hard. Or maybe a correct way to put it would be, that it is not as easy as it should be or could be. This is due to the fact that the throttle has a severe on/off tendency at low speeds / low revs. At…

DIY skid plate for Honda CRF 300 L

Yes, it is horrible and will not survive any sort of remotely rougher use. I just wanted something to protect the lower part of the bike from the rock shower until I can find I proper one I like. I would prefer plastic over metal because of how the metal ones tend to resonate the…

Recommended modifications for the CRF 250 Rally

Before anyone goes off the chain, the following are MY recommendations based on MY riding style and riding conditions. There is no right or wrong. This list is comprised simply because I often get asked what the “recommended” or “must do mods” are. MODIFICATION WHY LINKS Proper hand guards DO Saves you a lot of…

Aux light project for Honda 250 Rally

Foreword This is going to be a long winded post so bear with me. As for aux lights, the easiest solution would be to go with something like the Denali mounts and mount separate lights to the fork tubes. I wanted something different for 3 reasons. I wanted the light(s) to be as crash proof…

DRC Edge 2 tail tidy for Honda 250 Rally

Foreword I really did not feel compelled to install a tail tidy for this bike. The OEM version, while not pretty, is quite acceptable in my opinion. That said, one needs something to tinker with during the winter… Installation method I wanted to do a non destructive install, meaning that I want to be able…